The Cellsecure E2 and E6 SMS communicators are microprocessor controlled wireless control panels incorporating a rolling code receiver and an SMS communicator. The system incorporates the use of cellular phones and/or a PC with Cellsecure software to command, control and monitor a secured property from any GSM territory worldwide. Up to 30 detectors may be programmed into each system. Four cellular phones plus a PC basestation is the standard communication infrastructure. The basestation can reroute all information from the security system to a further 254 cellular numbers.
The system consists of:
* A 2-zone or 6-zone alarm system combined with an advanced GSM SMS communicator.
* Wireless passive infrared detectors and door-guards with build-in transmitters and lithium batteries.
* Remote key-ring transmitters.
* Sirens.
* An independent power supply unit.
Special features include:
* Zone identification on SMS (short message service).
* Full supervision of all detectors, sensor and standby batteries.
* Mains fail/restore SMS alerts.
* Wireless PIR detectors (indoor/outdoor and magnetic doorguards with built-in panic buttons).
Security features:
* All SMS commands from a cellular phone are protected by a unique and user definable 4-digit alphanumeric PIN number.
* Dual PIN numbers are used for access as well as programming facilities.
* Unauthorised access attempts are warned of access violation as well as the unauthorised cellular number being transmitted to the owner.
* Owner is always informed of a particular cellular number being used to command and control the security system.
For further details contact David Scales, (012) 664 6688, fax: (012) 664 6949, or e-mail: scalesd@cellsecure.co.za
© Technews Publishing (Pty) Ltd. | All Rights Reserved.
printer friendly version