COPA’s new COP903 is a surge protection device for coaxial cable-connected systems such as video surveillance systems and similar equipment. This unit also protects the 12 V DC voltage supplied from the power supply to the cameras. The SPD is DIN rail mountable which makes for a neat installation into 19-inch racking systems.
With a nominal operating voltage of 5 V DC, COP903 has a BNC (F)-Line or a BNC (M)-Equipment connecting terminal. Video signal cables are plugged into the surge arrester with the equipment plugged into the protected side.
Suitable for a wide range of signal frequencies, the surge arrester has a quick response time and a low 0,5 dB insertion loss. It has a maximum discharge current of 10 kA (8/20 s) and voltage protection up to 150 V. The green LED alarm mode indicates normal operation, while a ‘light-off’ indicates a failure condition. The cost-effective surge protection device operates in a temperature range from -40°C to
70°C.
COPA is represented locally by Surgetek.
For more information contact Surgetek, +27 (0)11 792 1303/4/5, [email protected], www.surgetek.co.za
© Technews Publishing (Pty) Ltd. | All Rights Reserved.
printer friendly version