Safety first in new University of Cape Town residence

September 2012 Fire & Safety

A new integrated fire and security protection system now ensures the safety of residents and visitors on the premises of a new University of Cape Town residence.

Early in 2012, Obz Square opened its doors to students – a mixed-gender residence – offering accommodation for up to 990 students in independent single en suite rooms. Special features of this 7-storey building on the Main Road, Observatory, include female-only floors and highly specialised electronic systems that enable universal access for the disabled.

Primary contractor, Neil Muller Construction, moved onto an existing site during 2010 and started works that included demolition and site clearing. The project took 20 months to completion. The resulting building accommodates 900 students in single rooms, house wardens in independent apartments and allows a mixed-use zone for retail and resident facilities on the ground floor. There are in addition two levels of basement parking for up to 1000 vehicles. It was a fast track project with tight deadlines.

Comprehensive PA, evacuation, universal access monitoring and access control systems at the main security desk.
Comprehensive PA, evacuation, universal access monitoring and access control systems at the main security desk.

As a high occupation density building with a sensitive mix of occupants in a busy street, building security is of paramount importance.

Consulting engineers, Solution Station, designed a fire and security protection system, with technical advice and input from FireSpec. As fire and security systems consultant and contractor, FireSpec was responsible for the installation. The system was installed to tight deadlines before handover of the building to the client late in 2011. The systems are a good example of integrated security, fire and other low-voltage security systems.

FireSpec CEO, Leo Slootmans, explains that besides being able to undertake the installation right through to sign-off, they were also able to become involved at the design stage, which greatly aided the process of integration. “The systems are an outstanding example of integrated security and fire, low voltage security systems”, he says. As one of the final contractors on site, they worked to a very tight schedule to ensure project completion on time. The work was signed off by Cape Town’s Fire Chief in November of 2011.

It is significant that the contractor was able to become involved at the design stage. This greatly aided the process of integration. Integrated systems included access control, fire detection, fire suppression, CCTV, PA systems, evacuation systems, integration of air conditioning, lift signals and access control for the accommodation, monitoring of alarm systems, air conditioning, fire escape doors and intercoms are centralised.

Undertaking a tour of the behind-the-scenes security in the building one is aware of complete 360-degree planning and attention to detail. Backing this is modern technology, a testament to how effectively the security and fire system industries have tapped into modern IT and electronics technologies.

The control room

All security, fire detection and other controls feed through to a centralised control room located in the main lobby near the main turnstiles.

Building controllers have access to separate control units for each system – including evacuation, intercom, access point control and CCTV monitors. Behind the control room is the electronic/server support room, which is access controlled and fire-protected. It contains the electronic nerve centre for the functioning of these services.

CCTV, fire detection, evacuation and PA systems

These are located at all central positions such as common rooms and walkways. Fire detection units are visible outside the ceiling board. Special detectors are also located behind the ceilings in order to provide an early warning of smoke, when it travels out of sight inside the cavities.

Intercom points predominate all the main passageways, of which a number of these points are universally accessible to allow easy usage by persons in wheelchairs. (There is also a unit in each universal access room).

Turnstiles are controlled by access card through the main security system.
Turnstiles are controlled by access card through the main security system.

These communication services are independent of evacuation systems and allow controllers to freely converse with individuals making the enquiry. Visitor and other announcements are made via well positioned loudspeaker units on each floor. The building planners went to exceptional lengths to make the building both safe and accessible to the disabled. For residents with physical challenges or handicaps, there are special needs rooms. Special panic buttons are installed in the special toilets for the disabled. In addition, there are no less than six refuge zones where persons with disabilities may converge to find a safe location pending evacuation.

From the ongoing and operational safety perspective, the high standards set by the building planners are expected to continue with the appointment of FireSpec as responsible for ongoing system servicing and maintenance. FireSpec executive in charge of the UCT project, Cecil Meyer, says this building is just part of an ongoing rollout of electronic system integration across all buildings within UCT.

For more information contact FireSpec, +27 (0)21 685 1111, [email protected], www.firespec.co.za





Share this article:
Share via emailShare via LinkedInPrint this page



Further reading:

Enhancing safety in battery energy storage systems
Technoswitch Fire Detection & Suppression Products & Solutions Fire & Safety
The calibration-free Combustible Gas & VOC Sensor by Technoswitch can be configured to detect various flammable gases, including electrolyte vapours (VOC) and hydrogen, and is an indispensable tool for ensuring the safety of Li-ion battery storage systems.

Read more...
ESPRIT intelligent fire panel range
Technoswitch Fire Detection & Suppression Products & Solutions Fire & Safety
Technoswitch recently added the EN54-approved ESPRIT intelligent control panel range to its product portfolio to complement the existing TC5000 intelligent control panel range, aimed at small and medium sites that require a cost-effective, networkable fire alarm system.

Read more...
Standards for fire detection
Fire & Safety
Nick Collins discusses standards for commissioning and handing over a fire project once the installation is complete.

Read more...
Standards for fire detection
SAQCC (Fire) Fire & Safety Associations
In the second article from SAQCC, Nick Collins focuses on SANS 10139, which is generally regarded as the ‘Book of Knowledge’ for any fire detection installer, commissioner and designer.

Read more...
Technology driving fire safety at Firexpo 2025
Securex South Africa News & Events Fire & Safety
As regulations change, safety and risk officers, and building managers are hard-pressed to keep pace with the exact requirements to ensure occupant safety and wellbeing. Firexpo’s role is to provide informed choices for the market.

Read more...
The unusual chemistry of lithium-ion battery fires
SafeQuip Fire & Safety
Traditional fire extinguishers, which use agents like water, foam, or dry chemicals, may not be suitable for lithium-ion battery fires due to the unique challenges posed by the high-energy density of these batteries.

Read more...
Saving lives with fire safety technology
Fire & Safety News & Events
The fire protection landscape is evolving swiftly, fuelled by technological advancements designed to improve safety and efficiency in fire detection, control, and suppression. These innovations transform traditional methods and establish new safety standards in residential and commercial spaces.

Read more...
Standards for fire detection
SAQCC (Fire) Fire & Safety
In the second article from SAQCC, Nick Collins focuses on SANS 10139, which is generally regarded as the “Book of Knowledge” for any fire detection installer, commissioner and designer.

Read more...
Rational design is not just a tick-box exercise
Fire & Safety
Rational design is about achieving performance-driven fire safety measures through sound engineering principles. It is not just a tick-box exercise, but involves a deep understanding of fire risks and behaviour, and developing customised fire protection strategies.

Read more...
Fire detection and gas suppression systems
Masc Solutions Products & Solutions Fire & Safety
Masc Solutions is an official Fike distributor and installer in South Africa, providing comprehensive design, supply, and installation services for specialised gas fire suppression systems.

Read more...