printer friendly version

Single remote control for secure villages

Residents of secure villages sometimes have to own up to three different remote controls: one for the main gates of the village, one for their residential gates and garage doors and sometimes one for the alarm system. Now, ClickOn Technology has introduced a 6-channel key-ring remote control, aimed specifically at solving this issue cost-effectively with a single remote control.

The remote control is shipped with six code-hopping channels as the factory default. Any or all of these channels can be programmed, via its channel keys to transmit a user-selected eight-digit code. The programming procedure is simple and does not require opening the unit at all. Once a channel has been programmed with the eight-digit code it will transmit that code. It may be reprogrammed with a different code or be converted back to be a code-hopping channel at any time. The solution includes a standard ClickOn code-hopping gate receiver.

The procedure for a typical secure village would be as follows:

* Program channel one of all remote controls with the same eight-digit code.

* Program channel one of a single remote control into the main entrance receiver.

Channel one of all these remote controls will now have access to the main entrance receiver. Channels 2 to 6 will still be available to each resident for his own use. These could be used for access to residential gates and garage doors, alarm system and lights.

For further details contact ClickOn Technology on tel: (012) 803 4962.

Share this article:

Further reading: