Low profile analog sensors

July 2003 Fire & Safety

Ziton's 700 series of analog sensors is among the slimmest low profile analog sensors. The system automatically compensates for calibration changes caused by dirt, temperature, humidity, voltage fluctuations and long term contamination.

Sensor sensitivity can be varied through four preset levels, either manually or automatically on a timed basis. Sensors automatically advise when they require maintenance.

Every sensor does a complete self-test at regular intervals and returns a test value to the control unit. If the test value is incorrect or not received, the control unit immediately identifies the sensor as faulty.

Built-in test features allow one person to test every sensor in the system.

Sensors plug into either a common surface mount or a recessed base by means of a twist-lock action. An optional locking device is provided to prevent unauthorised removal from the base.





Share this article:
Share via emailShare via LinkedInPrint this page



Further reading:

Managing the fire risk of transformer explosions
Issue 2 2020 , Fire & Safety
While a simple solution is to install adequate fire detection and suppression systems, this is hampered by the lack of necessary funding.

Read more...
Fire safety critical in healthcare
Issue 2 2020, Spero Sensors & Instruments, Technews Publishing , Fire & Safety
Healthcare organisations have a lot on their collective plates and it can be easy to overlook security issues in favour of more pressing demands.

Read more...
Fire alarms at sea
Issue 2 2020, Technoswitch , Fire & Safety
Technoswitch now offers marine approved conventional control panels from Haes, aimed at fire safety for all small to medium seafaring vessels.

Read more...
Kitchen fire suppression systems
Issue 2 2020, Technoswitch , Fire & Safety
Technoswitch has announced the addition of new 16 litre and 25 litre systems to its range of automatic kitchen fire detection and suppression systems.

Read more...
Fire detection for battery charging rooms
Issue 2 2020, FDIA (Fire Detection Installers Association) , Fire & Safety
Battery charging rooms pose fire explosion risks due to the presence of hydrogen gas produced when lead-acid batteries are being charged.

Read more...
Technology can help people in high-risk evacuations
Issue 2 2020 , Fire & Safety
Commercial buildings must not only be prepared for the possibility of a fire because they face newer threats - including terrorism, civil unrest and extreme weather.

Read more...
Fire Beam Xtra covers up to 160 metres
October 2019, Technoswitch , Products, Fire & Safety
The Fire Beam overcomes traditional beam detection challenges where building movement and accessibility made beam detection unreliable and laborious to commission and maintain.

Read more...
Emergency voice communication system
October 2019, Technoswitch , Products, Fire & Safety
The Technoswitch Emergency Voice Communication Systems concept offers fire telephone and disabled refuge systems, as well as integrating emergency assist alarm systems in a single solution.

Read more...
Fast detection of smoke and flames
October 2019, Bosch Building Technologies , Editor's Choice, CCTV, Surveillance & Remote Monitoring, Fire & Safety
Video-based fire detection AVIOTEC from Bosch has been optimised for tunnels to provide early and reliable detection of smoke and flames in these dark environments.

Read more...
Choosing the right fire detection system
August 2019, FDIA (Fire Detection Installers Association) , Fire & Safety
Charles Thiong’o from the FDIA highlights important factors to consider when choosing a fire detection system.

Read more...