Improving mining safety through technology

1 October 2019 Mining (Industry), Integrated Solutions

The South African mining sector frequently faces criticism for its poor safety record and high number of fatalities, but conditions are improving, and the proper utilisation of technology could be a major boost for safety in mining operations.

According to statistics on the safety performance of the mining industry in 2018, released by the Department of Mineral Resources, the sector recorded a 10% decrease in fatalities compared to 2017.

During the first two months of 2019, five fatalities were reported across South African mines, compared to 14 over the same period in the previous year. This represents a shift of 69%, which suggests the sector is improving its safety record. While this is encouraging, both 2017 and 2018 saw more fatalities than in 2016, which means that more can be done to improve the industry’s safety.


Lukas an der Merwe

Technology – especially the Internet of Things (IoT) – is instrumental to improving safety in mining environments, says Lukas van der Merwe, specialist sales executive: security, at T-Systems South Africa.

“It goes without saying that safety is crucial in mining. If anything goes wrong, people can die. While technology can do a lot to improve safety, it is important to make the connection between technology, cybersecurity and the physical safety of mineworkers,” he says.

Van Der Merwe explains that traditionally, operational technology (OT) which is used to control physical processes, devices and infrastructure within an industrial environment, was owned and operated by engineers and was maintained and developed separately from IT.

“This used to be a completely isolated and closed system, only accessible by whoever was on the mine’s network and it had no internet connection. This means that the OT system was really simple to manage and to secure. However, once we bring in IoT and connect devices on an OT network so that they can be remotely managed and be accessible from anywhere, at any time, we increase the risk of cyber threats and the possibility that these devices can be hacked.”

Jeanette Jacobs, new business sales executive at T-Systems South Africa, points out that many OT systems have been installed haphazardly over the past few years, with engineers often not knowing exactly what has been deployed, or which devices have been connected to the Internet.

“We’ve reached a point where the proliferation of these devices has reached a critical mass in terms of the exposure it brings to the environment and is outside the engineers’ control or knowledge. So, this is where we need to look at cyber threats that impact the OT environment. If an OT device is hacked, it can potentially kill people,” says Jacobs.

She points out that the obvious answer to this problem is to secure the network. “There are several solutions in this space. There are services and offerings that can scan the entire operational network and identify any and all potential threats and vulnerabilities to specific devices.”

While this can often be done quickly and affordably, Jacobs says mine operators must start thinking beyond the benefits of IoT and consider the potential risks that cyber threats pose to these disparate devices.


Jeanette Jacobs

Van Der Merwe notes that aside from the risks, the opportunities and benefits of IoT in mining are immense. “Applying IoT in any industrial setting has significant potential to address the wellbeing of employees. The costs of this technology have changed, allowing devices and IoT to become prolific. These can be used to monitor and control air quality, temperature, pressure, impact or vibration.”

He adds that IoT can help track where miners are in the event of a disaster, pinpoint where to look for them in case of a collapse, as well as help with understanding when air quality becomes dangerous and pre-empting possible events based on seismic detection.

“Many of the more advanced industrial operations around the world are now fully automated. Driverless vehicles are monitored and managed from remote locations. Preventative maintenance allows for the monitoring and replacement of components before they fail.

“IoT has had a significant part to play in this. Ultimately, if you take humans out of equation, it is the ultimate step in health and safety. However, cybersecurity then becomes crucial. The more you automate, the higher the risk,” Van Der Merwe concludes.

For more information, contact T-Systems South Africa, +27 254 7400, Thami.Malinga@t-systems.co.za




Share this article:
Share via emailShare via LinkedInPrint this page



Further reading:

The future of the VMS
CCTV Handbook 2020, Technews Publishing, Cathexis Technologies, Arteco Global, XtraVision , Editor's Choice, CCTV, Surveillance & Remote Monitoring, Integrated Solutions
Will AI-enhanced video analytic apps that can be downloaded and installed directly onto cameras take business away from the VMS market?

Read more...
An end to complexity and frequent false alarms
Issue 6 2020, Dallmeier Electronic Southern Africa , Mining (Industry)
The right camera technology and the right artificial intelligence (AI) systems provide for smarter perimeter protection with almost no false alarms.

Read more...
The evolution of security in residential estates
Residential Estate Security Handbook 2020 , Editor's Choice, Integrated Solutions, Security Services & Risk Management
Two large estates discuss their security processes and the ever-expanding scope of responsibilities they need to fulfil.

Read more...
Home-grown, cloud-based safety and security solutions
Residential Estate Security Handbook 2020 , IT infrastructure, Integrated Solutions
BeSecure has taken security and communications technologies and turned them into what is best described as care and safety solutions for the estate community in South Africa.

Read more...
Integrated security management system
Residential Estate Security Handbook 2020, Protoclea Advanced Image Engineering , Products, CCTV, Surveillance & Remote Monitoring, Integrated Solutions
Phorcas is a security information system developed by Protoclea designed to integrate multiple sub-systems into a powerful crime fighting solution.

Read more...
Perimeter security design
Issue 6 2020, XtraVision , Mining (Industry)
XtraVision offers some tips on designing the right perimeter security solution and selecting the appropriate technology.

Read more...
Wireless networks ideal for mines
Issue 6 2020, MiRO , Mining (Industry)
Wireless networks provide reliable and secure communications for mines and other environments where coverage is required over extended areas.

Read more...
Easing the tension of perimeter security
Issue 6 2020 , Mining (Industry)
Gallagher has different solutions, both standalone and integrated, for securing the perimeters of mines and most other environments.

Read more...
Introducing the JUKA 614
Issue 6 2020, Veracitech , Mining (Industry)
Providing the best possible image at the lowest health risk in the shortest time, by making use of the smallest footprint at the lowest cost.

Read more...
Connectivity vital to mines’ IoT success
Issue 6 2020 , Mining (Industry)
Inmarsat research finds 85% of organisations struggle to access reliable connectivity for IoT projects across their mine sites.

Read more...