Attack of the thingbots

1 February 2019 Editor's Choice, Information Security, Integrated Solutions

New research from F5 Labs has revealed that IoT devices are now cybercriminals’ top attack target, surpassing web and application services, and email servers.

Gartner currently estimates that the number IoT devices will surge to 20.4 billion by 2020, which represents a staggering 143% growth rate over three years.

IoT devices already outnumber people and are multiplying at a rate that far outpaces global population growth. Increasingly, lax security control could endanger lives as, for example, cellular-connected IoT devices providing gateways to critical infrastructures are compromised.

The fifth volume of The Hunt for IoT report notes that 13 thingbots – which can be co-opted by hackers to become part of a botnet of networked things – were discovered in the first half of 2018. Six were discovered in 2017 and nine in 2016.

Attack trends

Spain was the top country under attack during the past 18 months, including enduring a remarkable 80% of all monitored IoT attack traffic between 1 January and 30 June 2018. Other countries under consistent pressure included Russia, Hungary, the US and Singapore.

Most of the attacks between 1 January and 30 June originated in Brazil (18% of instances). China was the second biggest culprit (15%), followed by Japan (9%), Poland (7%), the US (7%) and Iran (6%).

The most infected IoT devices, as determined by their participation in bots, were Small Office/Home Office (SOHO) routers, IP cameras, DVRs, and CCTV cameras.

Distributed Denial of Service (DDoS) remains the most utilised attack method. However, attackers in 2018 began adapting thingbots under their control to encompass additional tactics including installing proxy servers to launch attacks from, crypto-jacking, installing Tor nodes and packet sniffers, DNS hijacks, credential collection, credential stuffing, and fraud Trojans.

The most common method attackers used to discover and eventually infect IoT devices was through global Internet scans looking for open remote administration services. Telnet and Secure Shell (SSH) protocols were the most popular, followed by Home Network Administration Protocols (HNAP), Universal Plug and Play protocols (UPnP), Simple Object Access Protocols (SOAP), and various other Transmission Control Protocol (TCP) ports used by IoT devices. Common vulnerabilities and exposures specific to IoT device manufacturers were also prominent routes to exploitation.

Worryingly, the report posits that there is a significant and growing concern that IoT infrastructures – the servers and databases to which IoT devices connect – are “just as vulnerable to authentication attacks via weak credentials as the IoT devices themselves.”

As a case in point, F5 Labs’ latest research discovered that cellular IoT gateways are just as vulnerable as traditional wired and Wi-Fi-based IoT devices. As many as 62% of tested devices were vulnerable to remote access attacks exploiting weak vendor default credentials. These devices act as out-of-band networks, creating network back doors, and are widely dispersed across the globe.

Tell-tale Telnets and attacks from new IP addresses

Notably there was a large spike in attack traffic in March 2018 that drove a 94% decline in total Telnet attack volume from Q1 to Q2 1018. This is important, as the frequency of Telnet attacks typically tails off when cybercriminals shift their focus from reconnaissance scanning to targeted attacks aimed at building deployable thingbots.

Interestingly, the top 50 logged attacking IP addresses are all new. This represents a big change from the previous four reports where the same IP addresses consistently appeared. The report believes this means there are a range of new threat actors in play, or that existing disruptors are transitioning to new systems. Other new developments include the introduction of attacking IP addresses hailing from Iran and Iraq.

Most attacks still originate in the networks of telecom and Internet Service Providers that provide Internet services to homes, small offices and larger enterprises. The trend has remained the same for 18 months and is expected to continue. Attackers typically rent systems in hosting centres to initiate the building of a botnet. Build efforts are then taken over by the infected IoT devices in telecom networks.

Mirai remains

Another key report observation is that there has been scant decrease in the global footprint of Mirai, which is the most powerful thingbot yet to have launched an attack.

The number of Mirai scanner systems across the world dwindled slightly from December 2017 to June 2018. However, Europe remains the only region where Mirai scanner infections remained relatively static from December 2017 to June 2018.

Not only is the threat of the original bot still powerfully present, but there are also at least 10 Mirai offshoots to consider (Annie, Satori/Okiru, Persirai, Masuta, Pure Masuta, OMG, SORA, OWARI, Omni, and Wicked). Furthermore, Mirai’s stepsiblings are capable of much more than launching DDoS attacks, and can deploy proxy servers, mine crypto-currencies and install other bots.

Turbulent times ahead

We are stuck with over 8 billion IoT devices around the world that, for the most part, prioritise access convenience over security.

Organisations need to brace themselves for impact, because IoT attack opportunities are virtually endless and the process of building thingbots is more widespread than ever. Unfortunately, it is going to take material loss of revenue for IoT device manufacturers, or significant costs incurred by organisations implementing these devices, before any meaningful security advances are achieved.

Therefore, it is essential to have security controls in place that can detect bots and scale to the rate at which thingbots attack. As ever, having bot defence at your application perimeter is crucial, as is a scalable DDoS solution.

For more information, go to https://www.f5.com/labs





Share this article:
Share via emailShare via LinkedInPrint this page



Further reading:

Zero-touch automation certificate life cycle management loop
Products & Solutions Information Security Security Services & Risk Management
ManageEngine completes the certificate life cycle management loop with CA-agnostic, zero-touch automation. New post-deployment automation in Key Manager Plus removes the last manual step in certificate renewal as lifespans gradually shrink to 47 days

Read more...
Fire safety in South Africa
Technoswitch Fire Detection & Suppression Technews Publishing SMART Security Solutions Fire & Safety Security Services & Risk Management Editor's Choice
Fire safety is sometimes ignored, sometimes relegated to whatever is cheapest, and sometimes treated with the seriousness it deserves, given that it focuses on protecting life and assets. SMART Security Solutions asked Brett Birch, MD of Technoswitch, for some insights into the realities of fire safety in South Africa.

Read more...
Sophos launches AI-native cybersecurity defence system
News & Events Information Security Security Services & Risk Management
Built for a threat landscape reshaped by AI, Sophos Fusion unites security operations, endpoint, network security, identity, email, and cloud into one defence system that prevents, detects, investigates, and responds at AI speed.

Read more...
A layered approach to safety in schools
Surveillance Integrated Solutions Education (Industry)
Physical security in schools and learning institutions is a hot topic in South Africa, with the Gauteng Department of Education recently announcing plans to use AI-powered cameras and biometric access to strengthen school safety.

Read more...
Balancing secure access control and fire safety
Editor's Choice Access Control & Identity Management Fire & Safety
In modern building management, few topics create as much tension as the intersection between security access control and fire evacuation safety. Nichola Allen of G2 Fire sheds light on this delicate balance.

Read more...
Preventing and suppressing lithium fires
SMART Security Solutions Technews Publishing Editor's Choice Fire & Safety Security Services & Risk Management Smart Home Automation
SMART Security Solutions asked Clyde Becker, director of Pyro Brand, for some insight into the mechanics of lithium-ion battery fire risks, especially thermal runaway, and to define a comprehensive, layered approach to fire detection and suppression.

Read more...
Integrated layers offer dependable security
OPTEX SMART Security Solutions Technews Publishing Perimeter Security, Alarms & Intruder Detection Integrated Solutions
A layered approach to security tightens protection and minimises downtime and operational risk. Moreover, integrating all the parts of a solution and proving they can do the job before spending money are critical.

Read more...
How ‘TikTok Brain’ is breaking legacy security training
Training & Education Information Security
Between doomscrolling, rapid-fire Slack notifications, and algorithmic video feeds, the average employee is trapped in an aggressive, highly engineered dopamine loop that automatically shuts down in traditional training situations.

Read more...
Quantum is coming
Infrastructure Information Security
The global cybersecurity landscape is approaching a turning point as quantum computing accelerates faster than most organisations realise; the shift is not a distant, theoretical concern, but a present-day business risk that demands immediate action.

Read more...
Outpacing cyberthreats in the age of AI
SMART Security Solutions Technews Publishing News & Events Information Security
SMARTpod talks to Fred Streefland, Global Field CISO for EMEA at Check Point Software Technologies, about framing modern cyber defence around adaptability, rapid decision-making, and the OODA loop adapted for cybersecurity.

Read more...










While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd. | All Rights Reserved.