No penetration of bulletproof guard booth

1 May 2015 Access Control & Identity Management

Delta Scientific announced that no bullets penetrated a Delta bulletproof guard booth in a downtown Austin, USA shooting. Early in the morning of November 28 (2014), a gunman started shooting up the recently opened federal courthouse, the Mexican consulate and the Austin Police Department headquarters. In the middle of the melee was a Delta bulletproof guard booth. During the shooting, nobody was injured but the gunman, who was killed.

“Most everyone is familiar with the standard manned guard booth, in which a person sits and allows drivers in and out of a facility,” explains Jeremy Andrews, Delta Scientific sales manager. “However, government facilities, border stations, military bases and other locales where there can be a ‘very unwanted guest’ all use much higher security booths, such as our bullet-resistant units.”

According to Andrews, bullet-resistant booths can be specified as Level 1, 2, 3 or 4, with 4 providing the highest level of resistance. Bullet-resistant booths are tested and certified to conform to Underwriters Laboratories standard UL 752 and others as required. If wanted, they are pre-wired to N.E.C. (i.e. 125 Amp, 120/240 Volt, 6/12 station, single phase or whatever current is used in that region) and come fully assembled, ready for service.

Typically, the specifications for a bullet-resistant booth will include:

• Protection against:

- Impact – Level 1.

- Handgun – 9 mm or .357 – Level 2.

- Handgun .44 magnum, 5.5 ammunition or 12g shotgun – Level 3.

- High-power rifle such as a 30.06, 7.62 ammunition, hand grenade, high explosive - Level 4.

• All structural members meet or exceed ASTM A500.

• Sliding or swing door fabricated from structural steel with heavy-duty hardware for bullet resistance.

• All electrical components will be UL approved and installed in accordance with the N.E.C.

Delta bullet-resistant Level 4 booths currently protect such varied locations as the Pentagon in Washington, DC, Ontario Airport and US and other nations’ embassies needing extra security in volatile countries. Fifty custom-designed bullet-resistant guard booths are now in use at the San Ysidro Landed Port of Entry (SYLPOE), the busiest land port in the world. Located between San Diego in the USA and Tijuana in Mexico, the port processes an average of 50 000 northbound vehicles per day. The majority of the traffic lanes will have two stacked bullet-resistant inspection booths created by Delta Scientific.





Share this article:
Share via emailShare via LinkedInPrint this page



Further reading:

AI agents become ‘First Class Identities’
Access Control & Identity Management
AI agents are now approving transactions, accessing systems, triggering workflows, and making decisions autonomously. But uncontrolled AI agents are becoming one of the largest security gaps in modern enterprises.

Read more...
Balancing secure access control and fire safety
Editor's Choice Access Control & Identity Management Fire & Safety
In modern building management, few topics create as much tension as the intersection between security access control and fire evacuation safety. Nichola Allen of G2 Fire sheds light on this delicate balance.

Read more...
Securing water infrastructure for industry and community
Access Control & Identity Management Fire & Safety Government and Parastatal (Industry)
The Badirammogo Water User Association needed a solution that could secure remote sites, reduce reliance on physical guards, and ensure uninterrupted service delivery while remaining aligned with its values and long-term strategy.

Read more...
Disconnect between confidence in identity security and operational reality
Access Control & Identity Management News & Events
New FIDO Alliance and HID study reveals gap between identity security confidence and reality; 94% of enterprises claim they can revoke employee access within 24 hours, yet 35% experienced delays or failures in the past two years.

Read more...
Paxton Solo training available to security installers
Paxton Access Control & Identity Management News & Events
Following the launch of Solo, Paxton’s brand-new access control system, the security manufacturer is rolling out dedicated Solo training sessions across South Africa to support security installers working with the system.

Read more...
Controlling access for people and vehicles
IDEMIA STid Security Technews Publishing Editor's Choice Access Control & Identity Management Asset Management Industrial (Industry) Mining (Industry)
When it comes to access control, the security requirements of mines and the industrial sector are similar, requiring a layered approach that combines physical barriers, digital authentication, and continuous monitoring to protect personnel, assets, and operational continuity.

Read more...
Paxton launches new phone-based security system: Solo
Paxton News & Events Access Control & Identity Management
Paxton has officially unveiled Solo, a phone-based, cloud-hosted access control system. As part of the launch, installers can claim a free Solo starter kit from Paxton, allowing them to trial the system and see how it can work for their business.

Read more...
Taking control of IAM in the AI era
Access Control & Identity Management AI & Data Analytics
AI and Shadow AI are proliferating, creating a series of new risks for organisations. To gain control over who and what has access to corporate data, organisations need unified control over their entire environment.

Read more...
Impro announces Primo update
News & Events Access Control & Identity Management Integrated Solutions
Impro Technologies recently held a launch event in which it introduced a series of new products, from new readers through to its updated Primo access management software.

Read more...
If you cannot prove identity, you cannot claim security
Access Control & Identity Management Information Security
Cybersecurity planning for 2026 is a structural change in how attacks are executed and how trust is exploited, demanding that companies stop layering tools on top of infrastructure and instead prioritise intelligence and identity.

Read more...










While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd. | All Rights Reserved.