The Provision-ISR IR PTZ camera is equipped with a smart synchronisation system between the lens’s zoom factors to the IR illumination intensity. In simple words it means that there is correlation between the zoom position and the IR illumination strength: the more the camera zooms in, the stronger and narrower the IR light will be.
These IR cameras are equipped with integral seven-LED array divided to three groups providing different illumination angles and distances. This was designed to provide perfect illumination coverage at any focal position from the widest scene to the narrowest. Each LED group will turn on/off at the appropriate time, to ensure an equal level of illumination and preventing over/under exposure.
Each PTZ camera needs a proper configuration of communication protocol, baud-rate and ID so it can properly communicate with the control device. In order to make it as easy as possible for the installer to setup, the camera can be configured by one of two options: DIP switch (hardware) or camera menu (software).
Changing tiny and confusing switches during installation can be a real burden while it can be done comfortably by software from a control centre. In the new IR PTZ we implemented new software that allows you to set the camera’s communications remotely by any RS-485 controller.
For more information contact HiTek Security Distributors, +27 (0)21 946 3344, [email protected], www.hiteksecurity.net
© Technews Publishing (Pty) Ltd. | All Rights Reserved.
printer friendly version