Register as an electric fence system installer

January 2013 News & Events

We all know that anyone hiring an installer or integrator must ensure the service provider is registered with PSIRA. Sadly, while it is illegal to hire someone or retain a company that is not registered to handle a security service or installation for you, the public is mostly unaware of this regulation.

New amendments to the Occupational Health and Safety Act that will come into effect in 2013 require all people and companies that work with electric fences to be registered (or licensed, if you will) with the Department of Labour. Not only does this change the nature of security work on electric fences, but should provide the public and businesses with a degree of confidence that registered companies can actually do the job properly and safely.

In order to be registered by the Chief Inspector as an Electric Fence System Installer as defined in the Electrical Machinery Regulations, 2012, promulgated by Government Notice R.242 of 25 March 2011, the applicant must submit his/her/its documents to the Chief Inspector to be considered for registration:

* Completed application form;

* Proof of experience on electric fence systems (letters from employers and letter of recommendation from the South African Electric Fence Installers Association or the South African Intruder Detection Services Association);

* Proof of working knowledge of the legislation and relevant health and safety standards applicable to electric fence systems (letter of recommendation from the South African Electric Fence Installers Association or the South African Intruder Detection Services Association);

* Copy of applicant’s South African identification document;

* Two photo’s (25 mm x 30 mm) colour or black & white;

* Receipt of R120,00 payable at any Labour Centre or bank.

If successful, this will provide the applicant with a temporary registration that will be valid till the 30th of September 2013. The Department of Labour has inspectors in all provinces that will be available to assist with the application or log onto www.labour.gov.za for the latest information and application forms.

Forms will be available from all electric fencing distributors and manufacturers. The following organisations may also be contacted:


Department of Labour:

Tel. no.: +27 (0)12 309 4000/4378

South African Electric Fence Installers Association

e-mail address: info@saefia.com

Fax to e-mail: 086 527 0374

Fax number: 0866 499 588

www.saefia.co.za


South African Intruder Detection Services Association

e-mail address: saidsa@mweb.co.za

Tel number: +27 (0)11 845 4870

Fax number: +27 (0)11 845 4850

www.saidsa.co.za



Credit(s)




Share this article:
Share via emailShare via LinkedInPrint this page



Further reading:

Woolworths attack raises bomb preparedness questions
News & Events
Two explosions have been reported at Woolworths stores in South Africa over the past week. SMART Security Solutions asked Jimmy Roodt, an experienced and accredited explosive ordnance disposal specialist from Gauntlet Security Solutions, for his insight into the events.

Read more...
Growing adoption of AI at work
News & Events AI & Data Analytics
AI adoption accelerates worldwide, with South Africa making gains amid uneven diffusion. Locally, South Africa ranks 46th of 147 economies measured, and its AI usage increased to 23,1% in Q1 2026.

Read more...
Enterprise AI hits the wall
News & Events AI & Data Analytics
Demands for AI privacy and sovereignty expose the limits of architectures built for centralised and borderless data flows. Organisations that redesign early are gaining a measurable edge in AI readiness and scale.

Read more...
71% of organisations suffered an identity breach
News & Events Information Security
The State of Identity Security 2026 report from Sophos finds human error and poor non-human identity management are the root causes of most attacks, as agentic AI accelerates the risk.

Read more...
From the Editor's desk: Security goes mainstream
Technews Publishing News & Events
      Welcome to SMART Security’s SMART Mining & Industrial Security Handbook 2026. While the world is focused on cybersecurity and AI, physical security has become a board-level concern across South Africa’s ...

Read more...
Global security in 2026
Editor's Choice News & Events Security Services & Risk Management Industrial (Industry) Mining (Industry)
The World Security Report 2026 states: “In a world of increasing volatility, physical security has evolved. It is no longer just a defensive measure; it is a critical driver of corporate value.”

Read more...
Industry perspective on industrial cybersecurity
Technews Publishing News & Events Infrastructure Industrial (Industry)
The Industrial Security Harmonization Group has released a joint industry perspective highlighting a critical truth in industrial cybersecurity: secure communication is not determined by protocols alone, but by how they are deployed and managed in real-world environments.

Read more...
The control room problem that nobody wants to talk about
Technews Publishing Editor's Choice
WhatsApp has become the unofficial backbone of security communications across the mining and industrial sectors, but it was never designed to be a security tool.

Read more...
Controlling access for people and vehicles
IDEMIA STid Security Technews Publishing Editor's Choice Access Control & Identity Management Asset Management Industrial (Industry) Mining (Industry)
When it comes to access control, the security requirements of mines and the industrial sector are similar, requiring a layered approach that combines physical barriers, digital authentication, and continuous monitoring to protect personnel, assets, and operational continuity.

Read more...
Aerial firefighter training revolution
Fire & Safety News & Events
Sophisticated new flight simulation software capable of accurately modelling the performance of firefighting helicopters could help train pilots to tackle wildfires more effectively and safely in the future.

Read more...










While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd. | All Rights Reserved.