printer friendly version

VM2 vibration detection monitor

The JVA VM2 is a perimeter intrusion detection system (PIDS) that utilises a microphone cable. The VM2 is designed to monitor one or two zones of microphonic (acoustic) cable to detect a perimeter breach through the noise and vibrations created by unauthorised access or vandalism. The monitored cables may be buried to detect digging, attached to a fence, or placed inside a wall, roof, or floor to detect illegal activity. The VM2, coupled with a correctly installed cable, creates a fully monitored, zoned intrusion detection system.

The VM2 allows you to control an electric fence from:

• Onsite using the optional LCD keypad or touch keypad.

• A control room using Perimeter Patrol.

• Anywhere in the world using the Internet.

• Simple set-up of sensitivity levels (threshold, event limit).

• Independent setting for each zone.

• On board Wi-Fi for virtual keypad programming.

• Built-in charger and space for a 12 V 7.2 Ah backup battery.

• Alarms on noise detection, cable cut, and cable short.

• A large number of programmable options.

• Two control inputs.

• Three switched 12 V DC outputs (siren and strobes).

• Three programmable relay outputs.

For more information contact Stafix Security Centres, +27 11 397 3507, sales@stafix.co.za, www.stafix.co.za

Share this article:

Further reading: