The ME housings in 17,5 and 35 mm component widths from Phoenix Contact can now be combined with new bus plugs for DIN rail mounting: The five-pin bus plugs with 3,81 mm pitch are mounted on the DIN rail and plugged together, saving space. The communications or power signals are connected to each other in parallel here. Gold-plated contacts ensure high transmission quality.
Devices are then locked into position in the usual way and automatically contacted. At the same time, the mounting rail bus plug mechanically guides the housing or device. It is possible to simply remove or replace individual modules from the device network without interrupting the signal chain. The deep plug position within the mounting rail provides more mounting room on the PCB while maintaining identical exterior dimensions.
For more information contact Rob MacKenzie, Phoenix Contact, 011 793 7121, [email protected]
Powering business resilience and field operations
Infrastructure Products & Solutions
[Sponsored] The Anker 757 Portable Power Station emerges as a strategic asset for businesses looking to overcome power instability and the demand for operational efficiency in remote and field-based environments.
Read more...PCB connectors for power systems Phoenix Contact
Passive Components
With the new PC 6 PCB connectors with screw connection, Phoenix Contact’s classic connection technology is available with enhanced touch protection for the new pin connector pattern.
Read more...Digital link 40x faster than broadband Internet Hiconnex
Interconnection
Axon’s AxoMach high-speed links were recently qualified by the European Space Agency to the ESCC 3409/001 standard, and are designed to transmit data at speeds of up to 40 Gbps for space applications.
Read more...Modular CAT7 inter-car-connection Hiconnex
Interconnection
These modular connectors are particularly suitable for harsh environments, and have a high resistance to industrial vibration and an IP67 protection rating.
Read more...SPE connector range Phoenix Contact
Passive Components
Single Pair Ethernet (SPE) is a communication technology that realises Industry 4.0 and IIoT applications, and Phoenix Contact’s Combicon range are ideal for SPE connections.
Read more...Multi-channel cable assembly RFiber Solutions
Interconnection
Withwave’s Multi-Channel SMPM Cable Assemblies (WMCM Series) provide a wide range of multiple coax connectors and flexible cable assemblies, with a choice of 26,5, 40 and 50 GHz configurations.
Read more...Compact power relays Future Electronics
Interconnection
The new HE-R Series power relays by Panasonic Industry are PCB-mounted relays for easy board assembly, with both two- and four-pole contact arrangement options.
Read more...High-density multicoax cable assembly RFiber Solutions
Interconnection
Withwave’s high speed and high-density Multicoax Cable Assemblies (WMX Series) provide a wide range of multiple coax connectors and flexible cable assemblies with a choice of 20, 40, 50, 67 or 110 GHz configurations.
Read more...Centralised distribution for M8 and M12 connectors Communica
Interconnection
Amphenol LTW’s distribution boxes facilitate efficient cable management, easy installation with pre-wired configuration, and provide a centralised distribution point for M8 and M12 connectors.
Read more...What is an RF connector? Spectrum Concepts
Editor's Choice Interconnection
If you look across the broader electromagnetic spectrum, the selection of the 3 kHz to 300 GHz frequency range for RF signals is a result of a balance between propagation characteristics, data transmission requirements, regulatory allocations, and the compatibility of electronic components and devices.
printer friendly version