Interconnection


Differential pair array connector system

3 November 2004 Interconnection Information Security

Samtec's DPAM/DPAF Series is a 'differential pair array' connector system on 2,16 mm pitch. This high speed, high density interface system features a staggered layout of differential pairs with perimeter grounds and solder crimped to the tails for ease in processing.

This array system features a 10 mm mated height and is expected to perform at speeds up to 4 GHz per pair in a differential pair signalling configuration. The DP array connector system is available as standard in sizes of 48, 104, or 168 differential pairs, and signal pair density is about 81 pairs per square inch (approx 13 pairs/cm²). Mated stack height is 10 mm, with 2,54 mm between rows. 8, 15, and 23 pairs per row is standard.

For more information contact Quentin van den Bergh, Arrow Altech Distribution, +27 (0)11 923 9600, [email protected]



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

General-purpose evaluation board
Altron Arrow DSP, Micros & Memory
Based on the 32-bit Arm Cortex-M7 S32K3 MCU in a 172 HDQFP package, the S32K3X4EVB-T172 offers dual cores configured in lockstep mode, ASIL D safety hardware, and HSE security engine.

Read more...
Zero drift current shunt monitors
Altron Arrow Power Electronics / Power Management
The NCS21671 and NCV21671 from onsemi are a series of voltage output current sense amplifiers offered in gains of 25, 50, 100, and 200 V/V.

Read more...
Analogue, digital and power in one connector
Spectrum Concepts Interconnection
Adapting existing technology for RF applications, required the development of specific PCB stack ups and launch optimisations to achieve the differential crosstalk and return loss performance needed for frequencies up to 8 GHz.

Read more...
Cybersecurity and AI
AI & Data Analytics Information Security
Cybersecurity is one of the primary reasons that detecting the commonalities and threats of what is otherwise completely unknown is possible with tools such as SIEM and endpoint protection platforms.

Read more...
Wi-Fi 6/BLE module enables rapid development
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Telit Cinterion has announced the WE310K6, a fully integrated, low-power module featuring dual-band, dual-stream Wi-Fi 6, and dual-mode Bluetooth/BLE.

Read more...
Analysis of switch-mode power supply: inductor violations
Altron Arrow Editor's Choice Power Electronics / Power Management
Common switch-mode power supply (SMPS) design errors are discussed, and their appropriate rectification is specified, with details on complications that arise with the power stage design of DC-DC switching regulators.

Read more...
Microsoft Windows IoT on ARM
Altron Arrow Computer/Embedded Technology
This expansion means that the Windows IoT ecosystem can now harness the power of ARM processors, known for their energy efficiency and versatility.

Read more...
Digital link 40x faster than broadband Internet
Hiconnex Interconnection
Axon’s AxoMach high-speed links were recently qualified by the European Space Agency to the ESCC 3409/001 standard, and are designed to transmit data at speeds of up to 40 Gbps for space applications.

Read more...
Accelerating the commercialisation of the 5G IoT markets
Altron Arrow Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.

Read more...
Modular CAT7 inter-car-connection
Hiconnex Interconnection
These modular connectors are particularly suitable for harsh environments, and have a high resistance to industrial vibration and an IP67 protection rating.

Read more...