Interconnection


New system addresses elevated high speed board stacking requirements

16 June 2004 Interconnection Products & Solutions

Samtec says its new Rise-Up high speed interconnect system (HSC8 Series) uses a controlled-impedance PCB with embedded ground plane for greatly improved performance over traditional connector sets. They are capable of transmitting data in excess of 6,25 Gbps and operate at up to 3,5 GHz/differential pair in 25 mm board stacking applications.

Connector interfaces (HSEC8/MEC8 Series) allow traditional parallel board stacking as well as perpendicular daughtercard type applications and horizontal or coplanar 'pizza box' applications. Depending on signal integrity requirements, various contact systems can be chosen for the best balance of performance and cost.

Off-the-shelf systems are available with single-ended (50 or 70 I/Os) differential pair (33 or 46 I/O pairs) routing and provide a 25 mm stack height. Application-specific boards for other stack heights as well as custom signal and power requirements are available.

For more information contact Quentin van den Bergh, Arrow Altech Distribution, 011 923 9600, [email protected]



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

General-purpose evaluation board
Altron Arrow DSP, Micros & Memory
Based on the 32-bit Arm Cortex-M7 S32K3 MCU in a 172 HDQFP package, the S32K3X4EVB-T172 offers dual cores configured in lockstep mode, ASIL D safety hardware, and HSE security engine.

Read more...
Zero drift current shunt monitors
Altron Arrow Power Electronics / Power Management
The NCS21671 and NCV21671 from onsemi are a series of voltage output current sense amplifiers offered in gains of 25, 50, 100, and 200 V/V.

Read more...
Analogue, digital and power in one connector
Spectrum Concepts Interconnection
Adapting existing technology for RF applications, required the development of specific PCB stack ups and launch optimisations to achieve the differential crosstalk and return loss performance needed for frequencies up to 8 GHz.

Read more...
Wi-Fi 6/BLE module enables rapid development
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Telit Cinterion has announced the WE310K6, a fully integrated, low-power module featuring dual-band, dual-stream Wi-Fi 6, and dual-mode Bluetooth/BLE.

Read more...
Powering business resilience and field operations
Infrastructure Products & Solutions
[Sponsored] The Anker 757 Portable Power Station emerges as a strategic asset for businesses looking to overcome power instability and the demand for operational efficiency in remote and field-based environments.

Read more...
Analysis of switch-mode power supply: inductor violations
Altron Arrow Editor's Choice Power Electronics / Power Management
Common switch-mode power supply (SMPS) design errors are discussed, and their appropriate rectification is specified, with details on complications that arise with the power stage design of DC-DC switching regulators.

Read more...
Microsoft Windows IoT on ARM
Altron Arrow Computer/Embedded Technology
This expansion means that the Windows IoT ecosystem can now harness the power of ARM processors, known for their energy efficiency and versatility.

Read more...
Digital link 40x faster than broadband Internet
Hiconnex Interconnection
Axon’s AxoMach high-speed links were recently qualified by the European Space Agency to the ESCC 3409/001 standard, and are designed to transmit data at speeds of up to 40 Gbps for space applications.

Read more...
Accelerating the commercialisation of the 5G IoT markets
Altron Arrow Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.

Read more...
Modular CAT7 inter-car-connection
Hiconnex Interconnection
These modular connectors are particularly suitable for harsh environments, and have a high resistance to industrial vibration and an IP67 protection rating.

Read more...