Tech Update - ARCNET transceivers: 485 versus 485D
2 June 2004
Computer/Embedded Technology
News & Events
Products & Solutions
Logistics (Industry)
Information from Electronic Products Design
Frequently a customer will ask, "I need an ARCNET interface module for my EIA-485 DC-coupled network, but should I use the 485 or the 485D?" This is an important issue; if a customer orders the wrong model, the product may not work as expected.
The EIA-485 specification deals with signalling over a multidrop balanced transmission line. Thus, differential line drivers and receivers are used. Both AC-and DC-coupling are common, but Contemporary Controls implements the DC-coupling in two distinct ways.
The 485 option assumes that driver software will put the ARCNET controller chip in 'backplane mode'. To exercise this option, a customer must have a driver capable of using the backplane mode. However, many customers do not have this ability.
The 485D option was designed for customers who have long been using legacy DOS driver software. Such software was written before the introduction of newer generation COM200XX controller chips and therefore cannot activate the backplane mode unique to these chips. To achieve proper results - and spare customers the necessity of rewriting their software - Contemporary Controls' 485D transceiver hardware creates the proper signalling in the absence of software control.
Consequently, in choosing between its 485 and 485D ARCNET interface adapter models, the customer must know what type of software is being used. Often prospective buyers do not have this information. As a general rule, if the application software is not Windows-based, the 485D is needed.
Note that proper EIA-485 signalling is achieved with either transceiver. This means 485 and 485D models can coexist on the same network - although it is rare that such a mix of adapters will actually be found. Active hubs are unaffected. Either 485 or 485D transceivers will function with active hubs equipped with 485 transceivers.
Further reading:
Embedded software development
Computer/Embedded Technology
The reliance on C is being reduced, with Python the language of choice for embedded applications in the fields of IoT and AI.
Read more...
Powering business resilience and field operations
Infrastructure Products & Solutions
[Sponsored] The Anker 757 Portable Power Station emerges as a strategic asset for businesses looking to overcome power instability and the demand for operational efficiency in remote and field-based environments.
Read more...
Microsoft Windows IoT on ARM
Altron Arrow
Computer/Embedded Technology
This expansion means that the Windows IoT ecosystem can now harness the power of ARM processors, known for their energy efficiency and versatility.
Read more...
Hardened-grade network switches
CST Electronics
Computer/Embedded Technology
Lantronix’s hardened switches provide Layer 2 or Layer 3 networking, and are available as Power-over-Ethernet (PoE) or Power-over-Ethernet Plus (PoE+).
Read more...
Switched mezzanine card for enhanced Ethernet connectivity
Rugged Interconnect Technologies
Computer/Embedded Technology
The TXMC897 sets a new standard in high-speed Ethernet communication, with advanced features and flexibility.
Read more...
Ryzen V3000 computer on module
Altron Arrow
Computer/Embedded Technology
SolidRun has recently announced the launch of its new Ryzen V3000 CX7 Com module, configurable with the eight-core/16-thread Ryzen Embedded V3C48 processor.
Read more...
1.6T Ethernet IP solution to drive AI and hyperscale data centre chips
Computer/Embedded Technology
As artificial intelligence (AI) workloads continue to grow exponentially, and hyperscale data centres become the backbone of our digital infrastructure, the need for faster and more efficient communication technologies becomes imperative. 1.6T Ethernet will rapidly be replacing 400G and 800G Ethernet as the backbone of hyperscale data centres.
Read more...
Maximising edge computing
Computer/Embedded Technology
Senao Networks has announced its launch of its SX904 SmartNIC based on the Intel NetSec Accelerator Reference Design.
Read more...
Duxbury unveils next-gen solar-powered switches
Computer/Embedded Technology
These powerful solar-powered switches are ideal for any environment requiring reliable Power-over-Ethernet (PoE) capabilities.
Read more...
Eight MP dome for harsh environments
Axis Communications SA
Surveillance Products & Solutions
Axis Communications announced a marine-grade stainless steel camera that offers performance in harsh environments. Enclosed in an electropolished stainless steel casing, it can withstand the corrosive effects of seawater and cleaning chemicals.
Read more...
printer friendly version