Exar is offering a next-generation silicon solution that incorporates a line interface unit (LIU) and framer in one innovative combination device. The XRT86L38, the first in a family of solutions, is an eight-channel (octal) device targeted at telecommunications equipment including digital access and cross connect systems, wireless base stations, and channel service units (CSUs) among others.
The devices incorporate Exar's R3 Technology (reconfigurable, relayless redundancy), a capability that delivers key benefits to customers designing T1/E1/J1 interface cards. The devices are reconfigurable with integrated termination supporting all common T1/E1/J1 line impedances, enabling customers to build one board with a single bill-of-materials.
Conventional approaches require fixed settings - T1, or E1, or J1, forcing customers to estimate both market needs, and choose device settings before manufacturing. This dictates that customers stockpile inventory of all configurations. Also, the series employs relayless redundancy eliminating the need for external relays for 1:1 and 1+1 applications by establishing a back-up channel that can be brought on-line in the event of failure.
The XRT86L38 device is an eight-channel physical-layer processor incorporating a T1/E1 (1,544 Mbps or 2,048 Mbps) framer and a LIU. Each of the eight framers has its own framing synchroniser and transmit-receive slip buffers. The device has a flexible microprocessor interface for easy configuration, control, and status monitoring.
The series is compliant with all the leading T1/E1/J1 specifications.
For more information contact Kobus van Rooyen, ASIC Design Services, 011 315 8316, [email protected]
Wi-Fi 6/BLE module enables rapid development Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Telit Cinterion has announced the WE310K6, a fully integrated, low-power module featuring dual-band, dual-stream Wi-Fi 6, and dual-mode Bluetooth/BLE.
Read more...Low phase noise amplifier RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
The MAAL-011158 from Macom is an easy-to-use low-phase noise amplifier that provides 12 dB of gain in a 32-lead QFN plastic package.
Read more...Full sensor to cloud solution CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.
Read more...Long-range Wi-Fi HaLow module TRX Electronics
Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.
Read more...Quectel launches 3GPP NTN comms module Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.
Read more...SIMCom’s A7673x series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.
Read more...Long-range connectivity module Avnet Silica
Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.
Read more...4G LTE-M/NB-IoT connectivity reference design iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.
printer friendly version