Stack gas analyser for hot/wet analysis
September 2003
Analytical Instrumentation & Environmental Monitoring
Infrastructure
Ametek's 910 mass emission analyser uses the 920 stack gas analyser for the analysis of SO2. It maintains the sample above the water dew point and analyses on a hot/wet basis. An important fact is that the velocity/flow is measured on an in-situ hot/wet basis, and as the mass emission is a product of these two values, the measurement base must be the same.
This method of extractive analysis is commonly referred to as hot/wet analysis. That is, the sample is extracted from the process and kept above the sample dew point throughout the sample transport and analysis. There is no dilution or drying of the sample, keeping the sample above the dew point not only refers to water but also to acid dew points, the sample system is capable of maintaining a sample temperature of up to 180°C or removing the acid at the SCU. This means sample integrity is maintained and any plugging or fouling is minimised.
The 900 Series analysers use hollow cathode lamps that emit characteristic lines of UV radiation. The positions of these lines are determined by the cathode metal, their wavelength centres being known to a high degree of accuracy. Since these bands are extremely narrow, they facilitate excellent linearity, accuracy and precision in absorbance measurements, independent of variations in bandpass filtering.
Separate reference and measurement paths are part of the photometer design. Light from the source lamp is split into two separate beams through the use of a beam splitter. One beam passes through clean air, the other through the gas sample. Both beams impinge on separate PMTs (reference and measure).
The unique sample cell design made of stainless steel and utilising a folded path configuration, provides for the photometer to be mounted outside of the oven in the electronics cabinet. At one end of the sample cell, a reflector block returns the photometer illumination back to the detector section through a thermal isolation tube.
For more information contact Noel Bauchop, OEN Enterprises, 011 675 4447, [email protected], www.oenenterprises.co.za
Further reading:
Ensuring occupational health and safety in mining
Analytical Instrumentation & Environmental Monitoring
Probe Integrated Mining Technologies (Probe IMT) has partnered with M3SH Technology to offer state-of-the-art environmental monitoring solutions that address these dual requirements.
Read more...
Sustainability of surface water
Endress+Hauser South Africa
Analytical Instrumentation & Environmental Monitoring
The sustainability of surface water is critical for South Africa’s economic development, social well-being and environmental health. Endress+Hauser has a full range of liquid analysis sensors and transmitters to measure important parameters and has an excellent global track record in water and wastewater process plants and various surface and industrial water monitoring sites.
Read more...
Keeping an eye on invisible radiation
Omniflex Remote Monitoring Specialists
Analytical Instrumentation & Environmental Monitoring
At its peak in 1994, the energy generation capacity of the UK’s nuclear power stations was 12,7 GW across 16 plants. In 2024, the capacity has fallen to around 5 GW, and the number of stations is down to nine. However, this is far from the end of the story as spent nuclear fuel remains radioactive for centuries, and requires rigorous safety processes to safeguard against leaks.
Read more...
Navigating South Africa's cybersecurity regulations
Sophos
Information Security Infrastructure
[Sponsored] Data privacy and compliance are not just buzzwords; they are essential components of a robust cybersecurity strategy that cannot be ignored. Understanding and adhering to local data protection laws and regulations becomes paramount.
Read more...
Creating a cybersecurity strategy in a world where threats never sleep
Information Security Infrastructure
[Sponsored Content] The boom of Internet of Things (IoT) technology and the chaos that surrounded the sudden shift to work-from-home models in 2020 kick-started the age of cybercrime. In that period, incidents rose by 600%, affecting every industry and showing no signs of slowing down.
Read more...
Gallagher Security’s achieves SOC2 Type 2 recertification
Gallagher
News & Events Integrated Solutions Infrastructure
Gallagher has achieved System and Organization Controls (SOC2 Type 2) recertification after a fresh audit of the cloud-hosted services of its integrated security solution, Command Centre. The recertification was achieved on 21 December 2023.
Read more...
Cyberattacks the #1 cause of business outages
Editor's Choice Information Security Infrastructure
The latest survey by Veeam Software shows that 92% of organizations will increase their spending on data protection by 2024 to achieve cyber resilience due to continued threats of ransomware and cyberattacks.
Read more...
Effective dust control in sugar processing
Analytical Instrumentation & Environmental Monitoring
BLT WORLD specialists work in conjunction with the global ScrapeTec team to offer dependable solutions for specific problems at the transfer points of conveyor systems in many industries where dust and material spillage are concerns, including the sugar sector.
Read more...
A benchmark for lubricant reliability in mining
Analytical Instrumentation & Environmental Monitoring
According to Craig FitzGerald from ISO-Reliability Partners, mines can save R500 000 or more on their yearly mill cleaning costs, while electricity consumption can be reduced by up to 12%, and lubricant consumption lowered up by up to 60% when using Bel-Ray Clear Gear lubricant.
Read more...
Nology races to end 2023
Editor's Choice News & Events Infrastructure
Nology ended 2023 with an event highlighting its various products and services to the local market, followed by a few laps around the Kyalami Indoor Karting track.
Read more...
printer friendly version