Telecoms, Datacoms, Wireless, IoT


SafetyBUS p fibre-optic transceivers

7 May 2003 Telecoms, Datacoms, Wireless, IoT Surveillance News & Events

The SafetyBUS p fibre-optic transceiver from Erni converts the electrical signals from a SafetyBUS p interface into optical signals. Bi-directional data transmission is possible in full duplex mode. SafetyBUS p systems allow data rates up to 500 Kbps.

The SafetyBUS p fibre-optic transceiver can be used at SafetyBUS p devices which are suitable for this application and which support the power supply at the interface. The transceiver is used with a 50/125 µm or 62,5/125 µm GI glass fibre at a wavelength of 850 nm and has optical ST connectors. The optical interface is not necessarily compatible with other fibre-optic systems so this transceiver should always be used as a pair.

Maximum transmission distance is 4000 m (50/125 µm), and 3400 m (62,5/125 µm). Power supply is 5 V d.c. (±5%), 70 mA max, via a D-sub connector. Dimensions are 84 x 47 x 16 mm and operating temperature is 0 to +65°C. Application-specific fibre-optic cable assemblies are available on request.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Pentagon appointed as Milestone distributor
Elvey Security Technologies News & Events Surveillance
Milestone Systems appointed Pentagon Distribution (an Elvey Group company within the Hudaco Group of Companies) as a distributor. XProtect’s open architecture means no lock-in and the ability to customise the connected video solution that will accomplish the job.

Read more...
Wi-Fi 6/BLE module enables rapid development
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Telit Cinterion has announced the WE310K6, a fully integrated, low-power module featuring dual-band, dual-stream Wi-Fi 6, and dual-mode Bluetooth/BLE.

Read more...
Low phase noise amplifier
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
The MAAL-011158 from Macom is an easy-to-use low-phase noise amplifier that provides 12 dB of gain in a 32-lead QFN plastic package.

Read more...
Webinar: Enabling the digital transformation of IIoT with Bluetooth
Telecoms, Datacoms, Wireless, IoT
Key industrial use cases for Bluetooth will be reviewed, including the main performance requirements for Bluetooth in industrial applications, and the technical features available.

Read more...
Full sensor to cloud solution
CST Electronics Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.

Read more...
Clearing the Static: Understanding the significance of ESD audits
Actum Electronics Circuit & System Protection
An ESD (Electrostatic Discharge) audit is the first step in establishing an ESD plan, and it is important to include all areas where ESD-sensitive components are being handled.

Read more...
Long-range Wi-Fi HaLow module
TRX Electronics Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.

Read more...
Quectel launches 3GPP NTN comms module
Quectel Wireless Solutions Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.

Read more...
SIMCom’s A7673x series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.

Read more...
Accelerating the commercialisation of the 5G IoT markets
Altron Arrow Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.

Read more...