Securing cargo for export

September 2018 Transport (Industry), Security Services & Risk Management

When cargo needs to be moved quickly to another country, the preferred method of transportation is via air. Delays in the supply chain can incur financial and reputational losses for exporters. Hi-Tech Security Solutions discusses the air cargo handling process.

According to the International Civil Aviation Organization (ICAO): “All those involved in these often complicated movements (of cargo) share the responsibility for ensuring the safety and security of the cargo and for operating within the law. In particular, they are responsible for ensuring that nothing contained in the cargo will endanger an aircraft and the lives of those travelling in it.”

David Alexander, general manager at Professional – a company providing risk assessment, training and security to the South African aviation sector – explains that South Africa is one of the 192 Member States of ICAO and as such is bound by its regulations and requirements with respect to exported cargo.

ICAO’s Member States have developed standards to support the implementation of a secure supply chain through the regulated agent and known consignor regimes. These entities are approved by the appropriate authority and may apply security controls, including screening, upstream in the air cargo supply chain.

In essence, these entities must ensure that the cargo to be carried on a commercial aircraft is protected from unauthorised interference from the point where screening or other security controls are applied, up until the departure of the aircraft. The implementation of the secure supply chain reduces the burden on aircraft operators, while simultaneously facilitating the processing of secure cargo when it arrives at an airport.

Protection procedures

Alexander points out that before cargo is loaded on to aircraft, it must be made secure. This occurs in two ways. Firstly, the cargo is delivered to the ground handling agent of the air carrier at the airport. The agent then screens the cargo using an X-ray machine or explosion-detection dogs to check for the presence of prohibited items such as improvised explosive devices.

“The key here is the prevention of acts of unlawful interference in the placement of an incendiary or explosive device. It must be noted that this procedure is not related to the security of cargo from a crime prevention perspective,” says Alexander.

Once the cargo is screened, it will be placed in a secure on-site warehouse that makes use of access control systems and surveillance cameras to ensure that no unlawful entry or tampering occurs. A security declaration will be issued which states that security control has been applied to this cargo and that it is safe for transport by air. The ramp handling agent will then ensure that the cargo is loaded on to the aircraft.

The second method of handling cargo within the secure supply chain is that a known consignor who is the originator of the cargo (the exporter or manufacturer), working in adherence with the approved Civil Aviation Authority (CAA) security manuals, would seal the cargo with a tamper-evident seal so that its integrity can be verified. They then send it to a regulated agent/freight forwarder. All of these parties are CAA-registered entities.

The cargo will be delivered with a security declaration to the regulated agent and then delivered to the ground handling agent. In this way there is an unbreakable and secure supply chain from the point of origination to the delivery point.

Any entity that renders cargo secure is obliged to issue a Consignment Security Declaration (CSD) which specifies the security status of the cargo and displays other important security information. This document (hard copy or electronic) is transmitted to each party involved later in the secure supply chain in order for them to apply the appropriate security measures to the consignment and protect it from unauthorised access.

Alexander explains that if one is a regulated agent, then it will not be legally necessary for the cargo to be screened again when it is received by the ground handling agent, since the implemented security measures are deemed to be sufficient. “However, what usually happens is that the ground handling agent will in any case X-ray the cargo as they are employed by the aircraft carrier and may have been instructed to do so. No charge may be raised for this security screening since, in theory, it is not required.”

It is important, says Alexander, that the staff of known consignors are carefully screened to ensure that they do not have a criminal record. The same criteria are applied to ground clearance employees and they additionally need to undergo aviation awareness and dangerous goods awareness training. In all cases there should be a designated official employed or contracted by the regulated agent who is responsible for all security screening and compliance of cargo.

Incoming

Alexander says that cargo coming into the country would be deemed secure if it has originated from one of the ICAO’s Member States that applies similar security measures. “Security measures are applied at the point of origin, not at the point of receipt. On arriving in South Africa, it will simply be subjected to our customs control procedures.

“In the case of what is deemed transit cargo, in other words, cargo that originates from a Member State but is bound for another country, the cargo is never actually unloaded from the aircraft and therefore will not be subject to either our customs controls or security measures. The onus is on the operator to ensure that cargo is secure, not the regulatory authority.”

He adds that with respect to transfer cargo, it would be placed in a bond warehouse which has an equivalent level of security and there would be rescreening of the cargo if there is any in doubt about its compliance with regulations, before onward carriage takes place.

Doing it right

Alexander points out that a secure supply chain potentially prevents delays in cargo being shipped out of the country. However, if the cargo has triggered an alarm when being screened by the X-ray machine or detection dogs, or the tape or seal is found to be damaged, then it will be held back and the entities responsible for its security will be alerted and instructed to ensure that the cargo is made secure.

“Often, the reason for a delay in transporting cargo via air is not a security one but rather one of safety compliance. There are 4 500 items defined as a Dangerous Goods by ICAO and the South African regulations and any cargo containing these items will only be considered safe to transport if the cargo is packed and shipped correctly. We find that because it costs more to transport these dangerous items, people may often be tempted not to declare them. However, once these items have been discovered and (1) the cargo has not been made secure and/or (2) there is no documentation stipulating that it qualifies as Dangerous Goods, then these goods will be returned for the attention of the responsible party for proper packaging and documentation,” Alexander explains.

This naturally causes delays in the shipping of the cargo and therefore in order to ensure that cargo is moved along the chain as quickly as possible, proper packaging and sealing procedures, in accordance with regulations, should be followed. In addition, if dangerous goods are to be shipped, this must be stipulated on the necessary documentation for review by the handling agent or the known consignor.

“Finally, one should be able to match the documentation with the contents of the cargo. Common sense, logic and integrity are basic attributes which people shipping goods via air should possess, thereby ensuring the expeditious delivery of their goods to the destination,” concludes Alexander.



Credit(s)




Share this article:
Share via emailShare via LinkedInPrint this page



Further reading:

Digital transformation in mines
NEC XON Technews Publishing Mining (Industry)
Digital transformation has been hyped to death, but is a reality all companies in all industries need to address, including the mining sector. BCX and NEC XON weigh in on the challenges mines face.

Read more...
Fire safety in mining
Technews Publishing Mining (Industry)
Clinton Hodgson, Head of the Industrial Fire & Life Safety Division at FS Systems International, provides SMART Security Solutions with his insights into fire safety risks and solutions as they pertain to the mining industry.

Read more...
Cybersecurity in mining
Technews Publishing Mining (Industry)
One does not usually associate mining with cybersecurity, but as big technology users (including some legacy technology that was not designed for cyber risks), mines are at risk from cyber threats in several areas.

Read more...
Deception technology crucial to unmasking data theft
Information Security Security Services & Risk Management
The ‘silent theft’ of data is an increasingly prevalent cyber threat to businesses, driving the ongoing leakage of personal information in the public domain through undetected attacks that cannot even be policed by data privacy legislation.

Read more...
Proactive strategies against payment fraud
Financial (Industry) Security Services & Risk Management
Amid a spate of high-profile payment fraud cases in South Africa, the need for robust fraud payment prevention measures has never been more apparent, says Ryan Mer, CEO of eftsure Africa.

Read more...
Mines require proof of performance
Technews Publishing Mining (Industry)
The relatively hostile environment and remote locations of mining establishments mean that any electronic/technical implementations have to be easily installed, require little or no maintenance and, once commissioned, require no adjustment.

Read more...
How to prevent and survive fires
Fire & Safety Security Services & Risk Management
Since its launch in August 2023, Fidelity SecureFire, a division of the Fidelity Services Group, has been making significant strides in revolutionising fire response services in South Africa.

Read more...
From the Editor's Desk: Something old and something new
Technews Publishing News & Events
      Welcome to the 2024 edition of SMART Security Solutions’ Mining Handbook. Mining is a challenging industry for security professionals, although security is a challenge on this continent, no matter your ...

Read more...
A long career in mining security
Technews Publishing Editor's Choice Security Services & Risk Management Mining (Industry)
Nash Lutchman recently retired from a security and law enforcement career, initially as a police officer, and for the past 16 years as a leader of risk and security operations in the mining industry.

Read more...
A constant armed struggle
Technews Publishing XtraVision Editor's Choice Integrated Solutions Mining (Industry) IoT & Automation
SMART Security Solutions asked a few people involved in servicing mines to join us for a virtual round table and give us their insights into mine security today. A podcast of the discussion will be released shortly-stay tuned.

Read more...